Checks the status of fcp-adapters.
$ check_netapp_pro.pl FCPAdapter -H <host> [--ok_state=<regex>] [...] [--help]
This plugin checks each fcp-adapters operational status. Alarms if an adapters status is not online (default).
-v for inspection, if you are not satisfied with the result.
Related DataONTAP CLI commands (examples)::
sim9::> network fcp adapter show -fields status node adapter status-oper ------- ------- ----------- sim9-01 0a online sim9-01 0b online sim9-01 0c online sim9-01 0d online sim9-01 0e online 5 entries were displayed.
Checks all fcp-adapters. Returns OK if every adpater is online.
Same as above, but excludes the adapters 0d and 0e.
Checks only the adapters on node 01.
Hint: The input for advanced examples is shortend. Replace the '...' below with ‑H <your filers ip or host-name>
Checks all adapters. Online and offlined adapters are considered to be OK.