Documentation
MetroClusterVserver-Check
Checks the configuration state of MetroCluster-vservers.
Usage
$ check_netapp_pro.pl MetroClusterVserver -H <host> [-s <node>] [...] [--help]
Description
This check gets the configuration-state of metrocluster-vservers and returns OK if they equal 'healthy'. Otherwise it returns CRITICAL.
By evaluating also the reason for failure, specific reasons can be defined which will suppress an alarm.
Other switches allow to include or exclude a single vserver or groups of verserves matching a pattern.
Simple Examples
Check all MetroCluster vservers for their configuration-state.
Same as above, but stay cool in case of a hudriwudri-problem.
Advanced Examples
Hint: The input for advanced examples is shortend. Replace the '...' below with ‑H <your filers ip or host-name>
Check all vservers on the node 'xnode10'
Check all vservers whose name starts with 'svm_cifs' on all nodes. E.g. svm_cifs10, svm_cifs20, ...